Figure 30 A Sample Measurement Screen Sub-Menu; Figure 31 A Sample Measurement Screen When Errors Present - Newport 6100 User Manual

System Operation
Use the UP and DOWN arrow keys to select the desired measurement screen.
Once the desired item has been selected, press the SETUP/ENTER key to
accept the new selection. The new selection will take effect immediately, and
the unit returns to the main measurement screen. Press Esc key to return to
Set Meas. Screen main menu.
4.4.9.5 Error Message Screen
Whenever the instrument generates an error message, a flashing "E" symbol
is shown on the left-top corner of the Measurement screen as shown in figure
below. Users can retrieve this error message from the instrument from the
Error Message screen. To retrieve error messages, press the SETUP/ENTER
key to view the setup menu. The first menu item will be "GET ERRORS" as
shown in the figure below.
Error
Message
Indicator
LDD and TEC Params

LDD Params
TEC Params
LIV Params
Figure 30 A Sample Measurement Screen Sub-menu
LDD: Ild=

Im =
TEC: Ts =
Ite=
Figure 31 A Sample Measurement Screen when Errors Present
250.00mA
0.0uA
o
25.000 C
0.000 A
61