Maintenance And Service - Newport 6100 User Manual

8

Maintenance and Service

8.1 Enclosure Cleaning
The source enclosure should only be cleaned with a mild soapy water
solution applied to a damp lint-free cloth. Do not use an acetone or alcohol
solution; this will damage the finish of the enclosure.
8.2 Obtaining Service
The Model 6100 Laser Diode and Temperature Controller contains no user
serviceable parts. To obtain information regarding factory service, contact
Newport Corporation or your Newport representative. Please have the
following information available:
1. Instrument model number (on the rear panel)
2. Instrument serial number (on rear panel or bottom of enclosure)
3. Description of the problem.
If the instrument is to be returned to Newport Corporation, you will be given
a Return Number, which you should reference in your shipping documents.
Please fill out a copy of the service form, located on the following page, and
have the information ready when contacting Newport Corporation. Return
the completed service form with the instrument.
There are no user serviceable parts inside the Model 6100 Laser
Diode and Temperature Controller. Work performed by persons
not authorized by Newport Corporation will void the warranty.
Before cleaning the enclosure of the Model 6100 Laser Diode
and Temperature Controller, the AC power cord must be
disconnected from the wall socket.
WARNING
WARNING