Table of Contents
Advertisement
60
System Operation
Now, use the DOWN arrow key to select the menu item that states "Press
Enter to Save". Press SETUP/ENTER key with this menu item selected to
save the system settings to the bin number selected earlier. The instrument
will automatically return to the Measurement screen once the saving process
has completed.
Recall Settings Menu
The Recall Settings menu item is used to recall previously saved instrument's
setup configurations. Recalling bin 0 will reset the unit to factory defaults.
To perform the recall operation, use the UP and DOWN arrow keys to select
this menu item. Press the SETUP/ENTER key to enter a sub-menu for this
item. A sample sub-menu for recalling the system parameters is shown in
figure below.
Use the UP arrow key to select the Bin Number. Press the SETUP/ENTER
key to change the Bin Number menu state from idle to active. Once the item
is in active state,.use the cursor keys to select the desire bin number. Press
SETUP/ENTER key to accept the desired bin.
Now, use the DOWN arrow key to select the menu item that states "Press
Enter to Rcl". Press SETUP/ENTER key with this menu item selected to
recall the system settings from the bin number selected earlier. The
instrument will automatically return to the Measurement screen once the
recalling process has completed.
4.4.9.4
Set Meas. Screen Menu
The Set Meas. Screen menu item is used to change the main measurement
screen: LDD and TEC Params or LDD Params or TEC Params or LIV
Params.
To select the desired measurement screen, use the UP and DOWN arrow keys
to select this menu item. Press the SETUP/ENTER key to enter a sub-menu
for this item. A sample sub-menu for selecting the measurement screen is
shown in figure below.
Bin Number =
Push Enter to Rcl.
Figure 29
A Sample Save Parameters Sub-menu
1
Advertisement
Table of Contents
