Table of Contents
Advertisement
System Operation
An unselected item simply displays the item name. Depending upon the item
(Mode, Sensor, Setpoint), it may also display data associated with that item.
The Setup screens also have up (
more items can be accessed by pressing UP and DOWN arrow keys
respectively.
4.4.7
Title Screen
The title screen is displayed for a few seconds every time the instrument is
powered ON. This screen is used to display the present firmware version of
the instrument. A sample title screen is shown in Figure 15.
Firmware version
number
4.4.8
Measurement Screen
The measurement screen is displayed after the instrument has been powered
ON for a few seconds. This is the topmost level display during normal
operation, and it indicates the status of the instrument. The instrument
supports four different measurement screens: LDD and TEC Params screen,
LDD Params screen, TEC Params screen and LIV Params screen.
4.4.8.1
LDD and TEC Params Measurement Screen
A sample LDD and TEC Params measurement screen is shown in Figure 16.
In this screen, the most important parameters related to LDD and TEC are
shown. The contents of this screen can vary depending upon the mode of
operation. See table below for details.
Newport Corp.
6100 – Laser Diode
and Temp.Controller
Ver. 1.0.1.0
Figure 15
LDD:
Ild=
Im =
TEC: Ts =
Ite=
Figure 16
A Sample LDD and TEC Params Measurement Screen
) and down (
) indicators to show that
A Sample Title Screen
250.00mA
0.0uA
25.000
0.000 A
45
o
C
Advertisement
Table of Contents
