General Cautions - Newport 6100 User Manual

Safety Precautions

This equipment is grounded through the grounding conductor of the
power cord.

Route power cords and other cables so that they are not likely to be
damaged.

Disconnect power before cleaning the equipment. Do not use liquid or
aerosol cleaners; use only a damp lint-free cloth.

Lockout all electrical power sources before servicing the equipment.

To avoid fire hazard, use only the specified fuse(s) with the correct type
number, voltage and current ratings as referenced in the appropriate
locations in the service instructions or on the equipment. Only qualified
service personnel should replace fuses.

To avoid explosion, do not operate this equipment in an explosive
atmosphere.

Qualified service personnel should perform safety checks after any
service.
1.2.2

General Cautions

Observe these cautions when operating this equipment:

If this equipment is used in a manner not specified in this manual, the
protection provided by this equipment may be impaired.

To prevent damage to equipment when replacing fuses, locate and correct
the problem that caused the fuse to blow before re-applying power.

Do not block ventilation openings.

Do not position this product in such a manner that would make it difficult
to disconnect the power cord.

Position the equipment so that access to the mains disconnect On/Off
switch is readily available.

Use only the specified replacement parts.

Follow precautions for static sensitive devices when handling this
equipment.

This product should only be powered as described in the manual.

There are no user-serviceable parts inside the Model 6100 Laser Diode
and Temperature Controller .

Adhere to good laser safety practices when using this equipment.
17