Table of Contents
Advertisement
Service and cleaning
▀
3. The tubes
After 3-4 tonnes of pellets consumption you need to
clean the tubes. Start by removing the cover plate on top
of the boiler. Unscrew the plastic knobs and remove the
lid. Lift the turbulators out of the tubes. Use the included
brush to clean the tubes.
4. Ash box
Clean the ash box at the same time as the turbulators.Do
not forget the area below the boilers fan, as there can be
fly ash from the combustion.
5. The fan
Clean the fan twice a year. Remove the 4 wingnuts (1)
located on the mounting plate. Lift fan and clean the
"wings"(2) from dust and soot. If the fan is not cleaned,
it will result in the boiler having slower heating and poor
combustion.
6. Flue attachment
Clean the connection to the chimney twice a year. In
time these will gather fly ash. Loosen the 2 wingnuts
which holds the lid on the angle. Scrape or use suction to
remove ash.
44
Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - 0300 - 22320 - info@effecta.se
Advertisement
Table of Contents
