Table of Contents
Advertisement
▀
Menu system
Heating system
►
Shunt group 1
Shunt group 2
Shunt group 3
El. heater
Shunt control
►
Sensor
Room temp
Flow. temp.
Radiator pump
Max flow temp
Min flow temp
Max room temp.
Min room temp.
Heating off
Outdoor temp
Heat curve
Slope
Adjustment
Energy saver
DHW Priority
Shunt group 1 & 2
►
Sensor
Flow. temp.
Radiator pump
-Current control-
Energy saver
DHW Priority
Energy saver
►
Lowering temp.
- 5 °C
Mon
06 _ _ _ _ 22
Tue
06 12 16 22
DHW Priority
►
Temp G1 min
Max flow temp.
El. heater
►
El step (A-B-C)
Fuse A
El. heater 6 kW
El. heater 3 kW
Other
►
Weekday
Clock
Calibrate sensors
Function test
Alarm
Language
Start guide
Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - 0300 - 22320 - info@effecta.se
Selection of shunt group
>
Selection of shunt group
>
Selection of shunt group
>
>
Settings for the electrical heater
Option of control.
Settings of the room temperature
Temp. to radiator/underfloor heating.
Activates radiator pump.
Maximum allowed temperature to the flow.
Minimum allowed flow temp.
Maximum allowed room temp.
Minimum allowed room temp. Shunt opens full at set temp.
Outdoor temp when heating turns off. Rad. pump is runned 1min/2hours.
Outdoor temperature at the outdoor sensor
The heating curve for the heating control (pg.36-38).
Option of slope to the heat curve (pg.36-38.).
Option of adjustment to the heat curve (pg.36-38.).
>
Options for energy saver
>
Options for DHW Priority
Option of control
Flow temperature
Activates radiator pump.
Selection of system
>
Options for energy saver
>
Options for DHW Priority
Weekly Schedule when the indoor temperature is lowered by a number of
degrees.
Example: At 06 returns to normal temperature and to be lowered again at 22.
Example: At 06 returns to normal, lowered at12 and at 16 returns to normal
again and lowered at 22.
Temperature when shunt closes to priority hot water.
Maximum allowed temperature to the flow.
Choose between different effects on the electrical heater. 1 phase is maximum 3kW.
Enter the house's main fuse.
Log of runtimes of the different electrical heating steps.
>
Weekday settings
Clock settings.
>
Options calibrate sensors
>
>
Test mode of the products different functions.
Alarm log
>
Choice of system language
>
>
Initiates the Start guide
31
Advertisement
Table of Contents
