Suction System And Storage - Effecta KOMPLETT III Installing, Maintenance, Service, Assembly

▀

Suction system and storage

Storage
If you build your own storage make sure that the walls can take the pressure of the pellets. It
is also important that the storage is completely tight so that it does not allow dust to escape.
An inspection hatch must also be installed so that you can serve and clean the storage when
needed.
Suction nozzle
In your system you need to install one or more
suction nozzles. The nozzle collect pellets from
storage via the suction hose that is connected
to the internal storage. The number of nozzles
needed depends one the size and shape of the
storage.On pg 22 you can see how to place
them.
Switch
For every nozzle you need a switch. The switch
is placed on the storage. If several nozzles
are installed you complement the switch with
a connector and a cover plate. When the
pellets have ran out at a nozzle you just switch
connector.
1 Suction nozzle
2 Hose clamp
5 Hose
Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - 0300 - 22320 - info@effecta.se
3 Connector
4 Hose for return
1 Suction to boiler
2 Return from boiler
3 Mounting plate
inclined wall
4 Mounting plate floor
5 Return nozzle
1 Suction to boiler
2 Return from boiler
3 Cover plate
4 Suction nozzle
5 Return nozzle
21