Table of Contents
Advertisement
Art. No.: 72801001
List of accessories and spare parts
12 List of accessories and spare parts
12.1 Ink cartridges
WARNING!
Safety hazard due to incorrect spare parts!
Incorrect or faulty spare parts may affect safety and
cause damage, malfunctions or failure.
Therefore:
– Only use original spare parts from the
manufacturer.
Procure spare parts via contracted dealers or directly from the
manufacturer. Address of the manufacturer Page 2.
NOTE!
The specified drying times can be reduced by
additional heat treatment (hot-air blower, IR
heater). The open time can be extended by spit
pulse programming.
Please note the ink specific settings for head voltage, fire time,
spitting and warming.
There is the possibilty to set up the ideally standard values for
each ink type directly on the system unit.
Chapter 8.26, Page 75
There is the possibility to set up the ideally standard values for the
respective ink type on the iDesign software or Web interface.
It makes sense to change the values carefully depending on the
application.
WARNING!
Material damage due to squirting ink!
During spitting, squirting ink soils the surroundings.
Page 88 of 127
Advertisement
Table of Contents
