Plugs And Sockets; Sensor - Weber Markoprint iJET Operating Manual

Art. No.: 72801001
Appendix
13.14

Plugs and sockets

13.14.1

Sensor

Sensor input: Optically decoupled
Standard: NPN (switching to GND)
Can be rejumpered to PNP.
Photocell with 4-pole M8 round plug
PIN Description
1 Power max. 100 mA
2 Optionally in/output
3 GND
4 Start pulse
The PIN2 can optionally be used as an additional input or output.
This must be programmed customer-specifically.
Input NPN as standard, can be rejumpered to PNP.
Output 24V / 10mA, active high.
CAUTION!
If PIN2 is used as the output it must not be loaded
with more than 10 mA.
E.g. PLC input
Floating contact (normally open) for start pulse with 4-pole M8
round plug
PIN Description
3 GND
4 Start pulse
Page 110 of 127
Value Unit
+ 24 V
+24 V
0 V
Input standard NPN
Value Unit
0 V
Input standard: NPN