Table of Contents
Advertisement
8.14 To set the nozzle rows
Fig. 19: Ink cartridge with view of the
nozzle plate
Each ink cartridge has two nozzle rows (A and B). One nozzle row
has 150 nozzles.
The nozzles in row A print the uneven numbers 1, 3, 5, 7
The nozzles in nozzle row B print the even numbers 2, 4, 6, 8
Per nozzle row A or B, 300dpi are printed. In this mode, the
nozzles are uniformly stressed and the speed setting is not as
critical as with A + B.
If, for instance, using A ~ B, every second print image is of poor
quality, nozzle row A; or nozzle row B can be activated.
Activate the nozzle rows as follows:
Nozzle row
Description
A ~ B
Printing with both nozzle rows, alternating.
The first print image is printed with nozzle row A
and the second text with nozzle row B.
A + B
Printing with both nozzle rows together.
Vertical resolution: 600 dpi
A
Printing only with nozzle row A.
Vertical resolution: 300 dpi
B
Printing only with nozzle row B.
Vertical resolution: 300 dpi
NOTE!
With setting A + B, the print speed must be
accurately set, to produce a good print result.
Otherwise the print image is blurred.
To select the nozzle row proceed as follows:
1.
Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2.
Call the Parameter submenu by rotating the iLOGIK and
select by pressing.
The Print Delay submenu is displayed.
3.
Call the Nozzle submenu by rotating the iLOGIK and select by
pressing.
The Nozzle submenu is displayed.
Page 67 of 127
Art. No.: 72801001
Operation
Advertisement
Table of Contents
