Idesign; Create A Print Image - Weber Markoprint iJET Operating Manual

9 iDesign

9.1 Create a print image

Create new Save label
label
Open existing Save label
label below
No print images can be created on the iJET controller itself.
Print images can be created and processed with the iDesign
software stored on the USB stick. For this purpose, this must be
installed on a commercially available PC (follow the enclosed
iDesign operating instructions).
The diagram below shows the operating surface of the iDesign
software.
Cascade Add text Add
arrangement counter
Arrangement
Add
on top of each
variable
other
Fig. 22: User interface Editor iDesign Software
Page 79 of 127
Add Move pixel Delete
barcode by pixel selection
Add date / Add logo / Turn selection
time picture through 90°
Art. No.: 72801001
iDesign
Ink
consumption
calculator