Table of Contents
Advertisement
Art. No.: 72801001
Operation
9.
To enter the printi ng width call the Z oom menu by rotati ng and s elec t by touc hing. Enter the desired value adn confir m by touc hing.
Parameter
Print speed
Print intensity
Printing width
To enter a constant print speed,
1.
Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2.
Call the System submenu by rotating the iLOGIK and select
by pressing.
The System submenu is displayed.
3.
Call the Nozzle Clock submenu by rotating the iLOGIK and
select by briefly pressing.
4.
Set the value to Intern by rotating the iLOGIK and confirm by
brief pressing.
5.
Jump a level by pressing the iLOGIK slightly longer and call
the parameter submenu by rotating, then confirm by briefly
pressing.
The System submenu Print delay is displayed.
6.
Call the Speed menu point by rotating and select by
touching.
7.
Set the desired value by rotating and confirm by touching.
8.
Call the Intensity menu by rotating and confirm by touching.
Set the value and confirm by touching.
9.
Call the menu Printing width by rotating the iLOGIK and
select by touching. Set the desired value by rotating and
confirm by touching.
Page 62 of 127
Min.
Max.
1
400
50
900
10
900
Unit
m/min
dpi
%
Advertisement
Table of Contents
