Table of Contents
Advertisement
8.7 Loading print image
8.8 Variable input
8.9 Printing start delay
1.
Touch the iLOGIC once in one of the status menus.
The Label Submenu is displayed.
2.
Call the selection of the texts present in the memory by
pressing the iLOGIK.
The stored texts are displayed.
3.
Call the desired text by rotating the iLOGIK and select by
pressing.
An actuation request appears.
4.
Confirm the text selected for printing by pressing the iLOGIK,
or set a printing pause by rotating the iLOGIK and confirm by
pressing.
Note!
Contains the selected print image a variable field, the
input option of the variable text is shown after the
print image selection.
Chapter 8.8, Page 58
If a print layout is selected, which contains a variablefield, an input
option is shown after the print image selection on the display. The
required number, character or special sign can be inserted by
turning the iLOGIK.
It is also possible to insert a space character, which sits in the edit
line between the right arrow and the zero.
You can jump up and down between the single digits in the
variable text by the arrow signs.
The previous digit can delete by the X.
The variable text will be confirmed and inserted by the tickmark.
The print start delay can be set in this menu, i.e. by how much is
printing delayed in millimetres after the product is detected by the
light barrier.
The delay can be selected between 0 and 999 millimetres.
The print start delay relates to the beginning of the print layout (left)
That means: It would be printed left-aligned by variable long print
layouts.
This is particular important by product direction from left to right.
Here was a placement of the print start on the product with
different layouts and variable data.
Page 59 of 127
Art. No.: 72801001
Operation
Advertisement
Table of Contents
