Jumper Inputs - Weber Markoprint iJET Operating Manual

Art. No.: 72801001
Appendix
13.15.4

Jumper inputs

CAUTION!
The jumpers may only be resoldered by the
manufacturer or trained specialized personnel.
Input settings:
The inputs can be reset to NPN or PNP with jumpers 10 to 13.
The jumpers consist of 3 soldered contacts.
Soldering bridge, centre - + = NPN
Soldering bridge, centre - - = PNP
Fig. 30:Jumper switch for sensor IN
The factory setting is NPN for all the inputs
Jumper Designation
J10 ENC OUT
J11 SEN IN
J12 SEN OUT
J13 ENC IN
Page 116 of 127
Standard Connection
+ = NPN Encoder Pin 2
+ = NPN Sensor Pin 4
+ = NPN Sensor Pin 2
+ = NPN Encoder Pin 4