Table of Contents
Advertisement
Art. No.: 72801001
Construction and function
5.4
SmartCard Functionality
The Markoprint iJET print system is equipped in the MK2 version with SmartCard identification of the
cartrigdes.
The iJET MK2 has an additional contact block which connects the SmartCard chip with the analysis
electronics by insertion of the SmartCard cartridge.
View of the SmartCard contacting
View of the SmartCard cartridge
The chip is detected by inserting the cartridge. The LEDs show this:
The Status-LED blinks green for 3 seconds if the SmartCard is detected.
The LED blinks green/red if a cartridge without SmartCard is inserted. The system works without the
advantages of the SmartCard data.
If the print system isn't activating for the use of cartridges without SmartCard, the LED will be blink red and
the print system doesn't print.
The LED blinks yellow/red if there is a read error on the SmartCard chip and the cartridge prints without
consideration of the SmartCard data.
Page 31 of 127
Advertisement
Table of Contents
