Table of Contents
Advertisement
6.5.1 Store ink cartridge
Abb. 8: Tintenkartusche einsetzen
Abb. 9: Tintenkartusche entnehmen
Transport, packaging and storage
If ink cartridges are not used for an extended period of time, they
must be stored in a cartridge clip (CartClip) to prevent the ink in the
nozzles from drying out.
To do this, the ink cartridges must be removed from the controller.
Kapitel 7.2.2, Seite 48
To insert the ink cartridge in the CartClip:
1.
Close the CartClip over the ink cartridge and press until the
top flap of the CartClip snaps into the holder.
To remove the ink cartridge from the CartClip:
1.
Lift the top flap of the CartClip until the ink cartridge is
released.
2.
Pull the ink cartridge upward out of the CartClip.
Page 43 of 127
Art. No.: 72801001
Advertisement
Table of Contents
