Table of Contents
Advertisement
7.2.2 Inserting / removing the ink cartridge
Fig. 13: Inserting ink cartridge
Fig. 14: Secure the ink cartridge
Fig. 15: Display change when properly
inserted cartridge.
Installation and commissioning
CAUTION!
Material damage due to improper ink cartridge
replacement!
With the printing process switched on, a print head
electronics fault may arise.
Therefore:
– Replace the cartridge only when the printing
process is switched off.
Inserting ink cartridge:
1.
Remove protective foil from the nozzle plate.
NOTE!
Use the ink cartridge as soon as possible after
having removed the protective foil.
2.
Wipe the nozzle plate before inserting with a lint free cloth.
3.
Insert the ink cartridge obliquely into the cartridge holder as
illustrated in the figure opposite.
4.
Lightly press down the flap of the cartridge holder to secure
the ink cartridge.
NOTE!
If a new ink cartridge is inserted, the cartridge
counters must be reset.
5.
Lightly press down the flap of the cartridge holder to secure
the ink cartridge.
Note!
The correct position of the ink cartridge can bee
seen in the Status display as in Fig.9
Page 49 of 127
Art. No.: 72801001
Chapter 8.16, Page 68
Advertisement
Table of Contents
