Table of Contents
Advertisement
Art. No.: 72801001
Operation
8.21 Date / Time
8.22 Sensor Internal / External
In this menus time and date can be adjusted.
1.
Touch the iLOGIK once in one of the status menus.
The Print image submenu is displayed.
2.
Call the System submenu by rotating the iLOGIK and select
by pressing.
The Date/Time submenu is displayed.
3.
Touch the iLOGIK once and set up to print by rotating, select
by pressing, or tick that the time and date will be retained.
4.
Adjust the respective positions, i.e. adjust the hours by
rotating the iLOGIK and select by touching. The minutes and
the date will be set by the same procedure.
5.
After all the settings have been carried out set the check box
to tick for confirmation and accept by touching the iLOGIK.
In this menu can be adjusted if the in the iJET integrated sensor or
an optional external sensor will be used for the product detection /
print activation.
1.
Touch the iLOGIK once in one of the status menus.
The Print image submenu is displayed.
2.
Call the System submenu by rotating the iLOGIK and select
by pressing.
The Date/Time submenu is displayed.
3.
Call up the submenu Sensor Internal / External by rotating
the iLOGIK and select by pressing.
4.
Rotating the iLOGIK to Internal for using a internal sensor or
to External if a external sensor is used.
Page 72 of 127
Advertisement
Table of Contents
