Table of Contents
Advertisement
Art. No.: 72801001
Disassembly
11 Disassembly
11.1 Safety
Staff
Electrical system
Improper disassembly
When service life expires, the apparatus must be disassembled
and disposed of in an environmentally-friendly manner.
Disassembly may only be performed by specially trained
specialised staff.
Work on the electrical system may only be performed by
electricians.
DANGER!
Danger to life through electric shock!
Danger to life if live components are touched.
Electrical components that are switched on may
execute uncontrolled movements and cause
severe injuries.
Therefore:
– Before starting disassembly, switch off the
electric power supply and fully disconnect.
WARNING!
Risk of injury caused by improper disassembly!
Stored residual energy, sharp-edged components,
points and corners on and inside the apparatus or
on the required tools may cause injuries.
Therefore:
– Ensure adequate space before starting any
work.
– Handle exposed sharp-edged components with
care.
– Keep the work area clean and tidy! Loosely
stacked or scattered components and tools are
potential causes of accidents.
– Secure components to prevent falling down or
falling over.
– Consult the manufacturer if uncertain.
Page 86 of 127
Advertisement
Table of Contents
