Solutions For The Edentulous Jaw - Dentsply Sirona Ankylos Balance C Laboratory Manual

Prosthetic concept

Solutions for the edentulous jaw

With Ankylos, the edentulous jaw can be restored
either using an implant-supported bridge (fixed) or a
removable overdenture anchored to the implant.
Individual by CAD design:
Ankylos Balance Base
Abutment C/ with
Atlantis bridge
With patient-specific
screw-retained Atlantis
bridgework on Ankylos
Balance Base Abutments
C/, you can also provide
edentulous and partially
edentulous patients with
CAD/CAM bridges on six
or more implants,
tension-free and with
utmost precision.
Dividing the spans is not
necessary. In addition,
the individually milled
metal structure that is
veneered in your dental
laboratory as usual will
ensure a brilliant esthetic
result.
Directions: see page 42 ff.
16
Conventionally and CAD/CAM-fabricated solutions for
Bridges (fixed)
Esthetic:
Ankylos Regular C/ or /X
Ankylos Regular C/
and /X abutments
with convex sulcus
design guarantee the
optimal combination
of functionality and
esthetics, even for
extensive multi-span
bridge constructions.
Customizable indexed
and non-indexed
abutments with a
wide range of forms
and sizes facilitate the
efficient fabrication of
the bridges, which can
be cemented or laterally
screw-retained.
Directions: see page 30 ff.
Here, too, there are several options for both methods –
from straightforward, standardized solutions right up
to customized premium restorations designed using
the CAD/CAM process.
Functional:
Ankylos Regular C/ or /X
with 3-in-1 cap or
Ankylos Standard C/
Without doubt, the
preeminent choice in
the prosthetics range
when an economical,
straightforward proce-
dure that is gentle on
the patient is required,
the simplified procedure
using caps that can be
attached to the abut-
ment is also suitable
for extensive prosthetic
work.
Both Ankylos Regular
C/or /X and Ankylos
Standard C/ abutments
with the correct caps for
each situation can be
used here.
Directions:
see page 30 ff.: (Regular)
and page 84 ff. (Standard)
Individual by CAD design:
Ankylos Balance Base
Abutment C/ with
Atlantis bar
With patient-specific
Atlantis bar restorations
on Ankylos Balance
Base Abutments C/,
edentulous patients
can be provided with
removable CAD/CAM
restorations on implants,
tension-free and with
utmost precision.
The bar is centrally
fabricated with the
collaboration of your
dental laboratory in a
customized design and is
seated tension-free, even
on the first insertion. The
prosthesis is fabricated in
the laboratory as usual.
Directions: see page 42 ff.