Dentsply Sirona Ankylos Balance C Laboratory Manual page 69

Prosthetic components Ankylos® SynCone® C/
The abutments for the Ankylos SynCone treatment
concept are only available with non-indexed tapered
connection geometry, as free positioning of the
abutments is essential.
Ankylos Balance C/ transfer post
with screw and Ankylos Balance C/
repositioning post
Impressions
Ankylos Balance C/ Transfer Post
• For transferring the implant
position to the master cast using
the PickUp technique (open tray)
• Available in two lengths
• Two-piece with separate screw
Ankylos Balance C/
Repositioning Post
• For transferring the implant
position to the master cast using
the repositioning technique
(closed tray)
• Repositioning post narrow for
cases with limited space available
• One-piece with integrated thread
All Ankylos SynCone C/ components are laser-marked
with a "C/" as in "C"onus according to their intended
use.
Ankylos SynCone C/
abutment 5°, straight and
angled, cover screw for
straight abutment
Model fabrication
Ankylos Balance C/ Implant Analog
• For fixing the prosthetic
components in the master cast
• Surgical steel, DIN 1.4305
Diameters, angulations and head heights Gingival heights
Ø 4.0 Ø 4.0 Ø 4.0 Ø 4.0 Ø 4.0
0° 7.5° 15° 22.5°
Dimensions Ankylos SynCone C/ abutment [mm]
Prosthetic restoration
Ankylos SynCone C/ Abutment
• For the restoration of the
edentulous mandible with an
immediate or delayed loaded
prosthesis on four prefabricated
tapered abutments placed
intraforaminally
• For the restoration of the
edentulous maxilla on six
osseointegrated implants
• Abutments with 5° tapered angle,
adaptable to the clinical situation
via three gingival heights (1.5/3.0/
4.5 mm) and five angulations
(0°, 7.5°, 15°, 22.5° and 30°).
• Cover screw for straight 5°
abutments must be ordered
separately
30° GH 1.5 GH 3.0 GH 4.5
*
Ø 4.0
69