Dentsply Sirona Ankylos Balance C Laboratory Manual page 46

Balance Base Abutment C/
Prosthetic components Balance Base
Abutment C/
Prefabricated copings are available for the easy
preparation of prosthetic restorations on the Ankylos
Balance Base Abutment C/ narrow without the need
for changing components in the patient's mouth.
Prefabricated copings for Ankylos Balance Base Abutment narrow and Balance Base
Abutment: retention copings (left), gold copings (center) and wax-up copings (right)
Prosthetic restoration
Ankylos Retention Coping for
Balance Base Abutment narrow
• For fabricating long-term
provisionals by polymerizing the
coping into the prosthesis
• Screw retention with M 1.6 mm
occlusal hex fixation screw (blue
anodized)
46
Ankylos Copings for
Balance Base Abutment narrow
• For laser-welded or soldered bars
• As a cast-on base for bridges
• High gold-content Permador
PDF alloy
• Screw retention with M 1.6 mm
occlusal hex fixation screw (blue
anodized)
Ankylos Wax-up Copings for
Balance Base Abutment narrow
• For modeling bridges
• Made from castable synthetic
material POM
• Retention with M 1.6 mm
occlusal hex fixation screw (blue
anodized), must be ordered
separately