Dentsply Sirona Ankylos Balance C Laboratory Manual page 55

1.0 mm Hex
Attaching the wax-up copings
Attach the Ankylos wax-up
copings for the Balance Base
Abutment C/ or Balance Base
Abutment C/ narrow by using the
blue occlusal fixation screw.
Screw-retained restorations
only may be produced
on Ankylos Balance Base
Abutments, since the abutment
height of the heads does not
provide adequate retention for
cementing.
Adjusting the wax-up copings
Mark the model height on the
screw channel. Using a thin cutting
disk, trim the screw channel and
check the height of the occlusion.
55