Dentsply Sirona Ankylos Balance C Laboratory Manual page 32

Regular C/ or /X
Prosthetic components
Ankylos® Regular C/ or /X
All prosthetic Ankylos C/X components are laser-
marked to indicate their use:
• Components with the "C/" mark use only the "C"one
for the connection and are not indexed. This means
that the abutment components can be positioned as
desired and are completely locked by the taper to
prevent rotation.
C/
Regardless of whether a prosthetic
restoration on indexed Ankylos
Regular /X abutments or on the
freely positionable Ankylos Regular
C/ abutments is planned, the
identical components with the C/X
marking are used for contouring
the soft tissues and for the
impression.
32
/X
Impressions
Ankylos /X Transfer Post
(PickUp Technique)
• For transferring the implant
position to the master cast using
the PickUp technique (open tray)
• Available in two lengths
• One-piece with integrated
straining screw, screw extension
enclosed
Ankylos /X Transfer Post
(Repositioning Technique)
• For transferring the implant
position to the master cast using
the repositioning technique
(closed tray)
• Available in two lengths
• One-piece with integrated
straining screw
• Components with the "/X" mark are indexed. The
index is used to position the abutment components
in one of six possible positions. In this case also, the
taper guarantees optimum stability and rotation
locking.
• Components with the C/X mark are used for indexed
or non-indexed prosthetics.
Ankylos /X transfer post
(PickUp technique),
long and short
Model fabrication
Ankylos Regular C/X
Implant Analog
• For fixing the prosthetic
components in the master cast
• Surgical steel, DIN 1.4305
Ankylos /X transfer post
(repositioning technique),
long and short