Dentsply Sirona Ankylos Balance C Laboratory Manual page 47

Titanium coping and fixation screws for
Balance Base Abutment C/ narrow:
Ankylos M 1.6 mm occlusal hex fixation
screws, short, long, extra long and 19 mm
Ankylos Titanium Coping for
Balance Base Abutment narrow
• For laser welding
• Cylindrical geometry
• Manufactured from grade 4
titanium
• Delivered without fixation screw
Ankylos M 1.6 mm Occlusal
Hex Fixation Screw for
Balance Base Abutment narrow
• Available in three lengths
• Short (order no. 3105 6022), blue
anodized
• Long (order no. 3105 6024), locks
onto the cap
• Extra long (order no. 3105
6025), projects 5 mm out of the
coping, can also be used with
the retention coping, for taking
the impression of the abutment
position with an open tray
From left to right: Ankylos insert for
prosthetic ratchet 1.8 mm hex, Ankylos
1.0 mm hex laboratory screwdriver and
Ankylos screwdriver handle
Instruments
Ankylos Insert for Prosthetic
Ratchet, 1.8 mm Hex
• For screw-retaining the Ankylos
Balance Base Abutments C/ with
the implant analog
• Torque: 25 Ncm
Ankylos 1.0 mm Hex Screwdriver
• For screwing in the 1.6 mm
occlusal hex fixation screw
• Reduced torque: 10 Ncm
Ankylos finisher for elaboration of the
prosthetic restoration
Ankylos Finisher for
Balance Base Abutment narrow
• For elaborating the surface layers
of bridge constructions
• One instrument each for Balance
Base Abutment C/ and Balance
Base Abutment C/ narrow
Ankylos Finisher for
Taper Occlusal Retention Screw
• For smoothing the screw channel
for occlusally screw-retained
structures
47