Dentsply Sirona Ankylos Balance C Laboratory Manual page 97

Fabricating the model and
the framework
Waxing up and fabricating the
framework are in accordance
with the current dental method.
Observe the processing directions
for cast-on sections for dental
alloys during waxing.
For angled abutments, the screw
seat can be laterally reworked with
the finisher.
Veneering
Veneer and polish the crown
as usual. Interdental spaces are
designed for hygienic capability.
The occlusal contact should be
only minimal. Lateral contact
points should be avoided.
97