Dentsply Sirona Ankylos Balance C Laboratory Manual page 34

Regular C/ or /X | Crowns and bridges
Prosthetic components for
Ankylos® Regular C/ or /X
Simplified procedure on abutment level
The Ankylos Regular C/X 3-in-1 cap is a quick and
easy option for fabricating a prosthetic restoration
using unground Ankylos Regular C/ or /X abutments
on the abutment level.
Lateral view
0° 7 .5° 15°
Ankylos Regular C/X 3-in-1 caps
Ankylos Regular C/X
3-in-1 Cap
Impressions
• For transferring the position of
the prosthetic abutment to the
master cast when taking the
impression over Ankylos Regular
C/ or /X abutments already
located in the implant
Temporary restorations
• For fabricating a temporary
restoration chairside with snap
effect (on unground abutments
only)
In the laboratory
• As a wax-up coping on implant
analogs and unground abutments
34
22.5°
Ankylos Regular C/X abutment analogs
Ankylos Regular C/X
Abutment Analog
• For attaching the prosthetics
components after taking
impressions via the 3-in-1 cap
Ankylos laboratory hex screwdriver
1.0 mm (left), Ankylos handle for abutment
analogs and abutments (right)
Instruments
Ankylos Laboratory
Hex Screwdriver 1.0 mm
• Reduced torque: 10 Ncm
• Prevents stripping the straining
screw
Ankylos Handle for Abutment
Analogs and Abutments
• For improved management of the
prosthetics components during
laboratory processing
• Prevent damage to the cast