Dentsply Sirona Ankylos Balance C Laboratory Manual page 65

Planning the CAM milling strategy
After approval of the supra-
structure design, the Atlantis
engineers develop an individual
milling strategy for each case.
Atlantis milling strategies have
been optimized to produce a
precise and tension-free fit.
Milling the structure
Then, depending on the material
guidelines, the titanium or cobalt-
chrome construction is milled
at the Atlantis manufacturing
facilities. All milling machines are
routinely quality controlled and
inspected in accordance with
quality systems regulations.
Before being shipped to the
laboratory, all suprastructures are
verified and inspected.
Atlantis will send the milled
structure to the dental laboratory,
together with the master cast and
the wax-up. The Ankylos occlusal
fixation screws required for
attaching the bar construction or
bridge in the mouth are included.
Processing in the dental laboratory
After delivery of the milled
structure, the dental laboratory
fabricates the bar prosthesis or
veneers the bridge framework. The
completed restoration, together
with the fixation screws, is handed
over to the practitioner for fitting.
65