Dentsply Sirona Ankylos Balance C Laboratory Manual page 33

Patient-specific Atlantis abutments
As an alternative to the prefabricated Ankylos
Regular C/ or /X abutments, patient-specific Atlantis
abutments can be used. For more information see
page 39.
Angulations and head heights
0° 7 .5° 15° 22.5°
Ankylos Regular C/ or /X abutment dimensions [mm]
Prosthetic restoration
Ankylos Regular /X or
Regular C/ Abutment
• With indexing (/X) or freely
positionable (C/)
• One-piece with integrated
straining screw
• Easily adaptable to the clinical
situation with four gingival
heights (0.75/1.5/3.0/4.5 mm)
and up to six angulations
(0°/7.5°/15°/22.5°/30°/37.5°)*
• Can be customized by grinding
• Cementable or laterally screw-
retained with Ankylos M 1.4 lateral
hex fixation screw (red, order
no. 3105 6301), 30° and 37.5°
angulations also with occlusal
screw-retention
• Cannot be cast, cannot be fired
Gingival heights and diameters
Ø 5.7 Ø 5.7 Ø 5.7
30° 37 .5° GH 0.75 GH 1.5
* *
Ankylos M 1.4 Lateral Hex
Fixation Screw
• For fabricating laterally screw-
retained crowns and bridges on
Ankylos Regular C/ and /X
abutments
• Order no. 3105 6301 (red)
• Permador cast-to horizontal
screw seat available
(order no. 3105 6304)
* GH 0.75 up to 37.5°, GH 1.5 up to 30°
Ø 5.7 Ø 5.7 Ø 5.7
GH 3.0 GH 4.5
Ankylos Regular C/ abuments straight
(above) and angled (below). Also available
indexed as Regular /X.
Ankylos Occlusal Retaining Screw,
short
• For occlusal screw retention of
crowns on Ankylos Regular C/
and /X abutments with 30°and
37.5° angulations
• Order no. 3105 6022 (blue)
33