Ankylos Standard C - Dentsply Sirona Ankylos Balance C Laboratory Manual

Standard C/
Prosthetic components Ankylos® Standard C/
All Ankylos Standard C/ components are laser
marked according to their use with the "C/" for "Cone"
marking.
Ankylos Standard C/ abutment, straight,
diameter a (above) and b (below)
Prosthetic abutments
Ankylos Standard C/ abutments
are selected and incorporated prior
to taking the impression at the
chairside. After impression taking,
the abutments remain in the
patient's mouth.
86
a a a
Ankylos Standard C/ abutment, angled,
diameter a (above) and b (below)

Ankylos Standard C/

Abutments, straight
• Two diameters (a, 3.3 mm, and
b, 4.5 mm), four gingival heights
(1.5, 3.0, 4.5 and 6.0 mm) and
two abutment heights (4.0 and
6.0 mm) allow great flexibility
• One-piece with integrated thread
• Chairside abutment selection; the
abutments remain in the patient's
mouth
• Simplified supragingival
impression taking and try-in of
framework
• Cemented or occlusally screw-
retained
• Titanium alloy, Ti6Al4V
Gingival heights
b b b b
a
GH 1.5 GH 3.0 GH 4.5
Dimensions Ankylos Standard C/ abutment
[mm]
Ankylos Standard C/
Abutments, angled
• Angulation 15°; two diameters
(a, 3.3 mm, and b, 4.5 mm),
two gingival heights (1.5 and
3.0 mm) and two abutment
heights (4.0 and 6.0 mm)
allow great flexibility
• One-piece with straining screw
• Cemented or laterally screw-
retained
• Titanium alloy, Ti6Al4V
GH 6.0