Dentsply Sirona Ankylos Balance C Laboratory Manual page 15

Simple:
Ankylos Balance
Base Abutment C/
If straightforward and
efficient fabrication of
the bridge should be a
priority, a bridge restora-
tion on Ankylos
Balance Base Abut-
ments C/ is an option.
The prosthetic abut-
ments can be selected
both in the laboratory
and directly at the chair-
side.
As cementing is contra-
indicated due to the low
abutment height, only
screw-retained bridges
can be fabricated on
these abutments.
Directions: see page 42 ff.
CAD/CAM prosthetics for
Bridges / anterior and posterior region
Patient-specific and
highly esthetic: Ankylos
TitaniumBase C/ or /X
The Ankylos Titanium-
Base allows for
the fabrication of
esthetically high-quality
ceramic abutments
with titanium core. With
these adhesive bases
with prefabricated taper
connection, available
both, indexed and non-
indexed, patient-specific
restorations can be
fabricated that are as
close as possible to the
natural esthetics of the
anterior and posterior
regions.
Individual by CAD design:
Ankylos Balance Base
Abutment C/ with
Atlantis bar
With patient-specific,
screw-retained
Atlantis bridgework on
Ankylos Balance Base
Abutments C/, you can
provide edentulous and
partially edentulous
patients with a fixed
restoration of utmost
precision. The bridge
framework is centrally
designed and fabricated
with the collaboration of
your dental laboratory
and fits tension-free.
The individually milled
metal structure is
veneered in your dental
laboratory as usual.
Directions: see page 42 ff.
15