Scanning The Quadrant And Jaw - Dentsply Sirona CEREC AC Connect Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC AC Connect
64 32 087 D3492
D3492.201.07.24.02 07.2018
7.4.7

Scanning the quadrant and jaw

The following scan regulation applies for the acquisition of a complete
quadrant or jaw arch.
The first (fourth) quadrant is scanned up to the opposite second front
tooth by moving the camera in parallel along the jaw arch.
Start the scanning process
➢ Position the camera occlusally above the last tooth on the right, to
start the scanning process.
7 Operation
7.4 Directing the camera
47