Configuring Interconnection Node: Example - Cisco ASR 9000 Series Configuration Manuallines

Configuring Interconnection Node: Example

ethernet ring g8032 RingA
# Set up the bridge domains
bridge group ABC
# EFPs configuration
interface Gig 0/0/0/0.1 l2transport
encapsulation dot1q 5
interface Gig 1/1/0/0.1 l2transport
encapsulation dot1q 5
interface g 0/0/0/0.2 l2transport
encapsulation dot1q 10-100
interface g 0/1/0/0.2 l2transport
encapsulation dot1q 10-100
interface g 0/2/0/0.2 l2transport
encapsulation dot1q 10-100
Configuring Interconnection Node: Example
This example shows you how to configure an interconnection node. The following figure illustrates an open
ring scenario.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
344
port0 interface g0/0/0/0
port1 interface g0/1/0/0
instance 1
description BD2-ring
profile ERP-profile
rpl port0 owner
vlan-ids 10-100
aps channel
level 3
port0 interface g0/0/0/0.1
port1 interface g1/1/0/0.1
bridge-domain BD2
interface Gig 0/0/0/0.2
interface Gig 0/1/0/0.2
interface Gig 0/2/0/0.2
bridge-domain BD2-APS
interface Gig 0/0/0/0.1
interface Gig 1/1/0/0.1
Implementing Multipoint Layer 2 Services