Configuring Mac Address Security - Cisco ASR 9000 Series Configuration Manuallines

Configuring MAC Address Security

• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring MAC Address Security
Perform this task to configure MAC address security.
SUMMARY STEPS
1. configure
2. l2vpn
3. bridge groupbridge-group-name
4. bridge-domainbridge-domain-name
5. neighbor { A.B.C.D } { pw-id value }
6. mac
7. secure [action | disable | logging]
8. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)#
Enters L2VPN configuration mode.
Step 3 bridge groupbridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group csco
RP/0/RSP0/CPU0:router(config-l2vpn-bg)#
Creates a bridge group so that it can contain bridge domains and then assigns network interfaces to the bridge domain.
Step 4 bridge-domainbridge-domain-name
Example:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
262
Implementing Multipoint Layer 2 Services