Cisco ASR 9000 Series Configuration Manuallines page 354

L2vpn and ethernet services configuration guide
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Bridging on IOS XR Trunk Interfaces: Example
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)#end
RP/0/RSP0/CPU0:Jul 26 10:48:21.342 EDT: config[65751]: %MGBL-SYS-5-CONFIG_I : Configured
from console by lab
RP/0/RSP0/CPU0:router#show bundle Bundle-ether10
Bundle-Ether10
Status:
Local links <active/standby/configured>:
Local bandwidth <effective/available>:
MAC address (source):
Minimum active links / bandwidth:
Maximum active links:
Wait while timer:
LACP:
mLACP:
IPv4 BFD:
Port
--------------------
Gi0/2/0/5
Gi0/2/0/6
RP/0/RSP0/CPU0:router#
RP/0/RSP0/CPU0:router#show l2vpn bridge-domain group examples
Bridge group: examples, bridge-domain: test-switch, id: 2000, state: up, ShgId: 0, MSTi: 0
Aging: 300 s, MAC limit: 4000, Action: none, Notification: syslog
Filter MAC addresses: 0
ACs: 4 (1 up), VFIs: 0, PWs: 0 (0 up), PBBs: 0 (0 up)
List of ACs:
List of VFIs:
RP/0/RSP0/CPU0:router#
This table lists the configuration steps (actions) and the corresponding purpose for this example:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. interface TenGigE0/1/0/2
13. l2transport
14. l2vpn
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
328
Flap suppression timer:
Device
---------------
Local
Link is down
Local
Link is down
BE10, state: down, Static MAC addresses: 0
Gi0/2/0/0, state: up, Static MAC addresses: 0
Gi0/2/0/1, state: down, Static MAC addresses: 0
Te0/5/0/1, state: down, Static MAC addresses: 0
configure
interface Bundle-ether10
l2transport
interface GigabitEthernet0/2/0/5
bundle id 10 mode active
interface GigabitEthernet0/2/0/6
bundle id 10 mode active
interface GigabitEthernet0/2/0/0
l2transport
interface GigabitEthernet0/2/0/1
l2transport
Implementing Multipoint Layer 2 Services
Down
0 / 0 / 2
0 (0) kbps
0024.f71e.22eb (Chassis pool)
1 / 1 kbps
64
2000 ms
Operational
Off
Not configured
Not configured
State
Port ID
-----------
--------------
Configured
0x8000, 0x0001
Configured
0x8000, 0x0002
B/W, kbps
----------
1000000
1000000

Advertisement

Table of Contents
loading

Table of Contents