Cisco ASR 9000 Series Configuration Manuallines page 560

Configuring EVPN Ethernet Segment
RP/0/RSP0/CPU0:router(config)# evpn
Enters EVPN configuration mode.
Step 3
(Optional) timers
Example:
RP/0/RSP0/CPU0:router(config-evpn)# timers
Configures global EVPN timers.
Step 4 (Optional) peering seconds
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# peering 15
Configures the global peering timer. Default is 3 seconds. Range is 0 to 300 seconds.
Step 5
(Optional) recovery seconds
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# recovery 30
Configures the global recovery timer. Default is 30 seconds. Range is 20 to 3600 seconds.
Step 6
exit
Example:
RP/0/RSP0/CPU0:router(config-evpn-timers)# exit
Exits the current configuration mode.
Step 7 interface Bundle-Ether bundle-id
Example:
RP/0/RSP0/CPU0:router(config-evpn)# interface Bundle-Ether1
Enters bundle interface configuration mode.
Step 8
ethernet-segment
Example:
RP/0/RSP0/CPU0:router(config-evpn-ac)# ethernet-segment
Enters the EVPN ethernet-segment configuration mode.
Step 9 identifier type esi-type esi-identifier
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
534
EVPN Features