Cisco ASR 9000 Series Configuration Manuallines page 122

Configuring L2VPN VPWS SS-PW
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
interface typeinterface-path-id
Example:
RP/0/RSP0/CPU0:routerRP/0/RP00RSP0/CPU0:router# interface TenGigE0/1/0/12
Enters interface configuration mode and configures an interface.
Step 3 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters Layer 2 VPN configuration mode.
Step 4
xconnect group group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group pw-he1
Configures a cross-connect group name using a free-format 32-character string.
Step 5 p2p xconnect-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p pw-ss
Enters P2P configuration submode.
Step 6
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)# interface gigabitethernet 0/1/0/9
Specifies the interface type and instance.
Step 7 neighbor routed global-id: prefix: ac-id source ac-id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)# neighbor routed 100:2.2.2.2:10 source 10
Enables pseudowire routing configuration submode for the p2p cross-connect.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
96
Implementing Point to Point Layer 2 Services