Cisco ASR 9000 Series Configuration Manuallines page 657

L2VPN Services over Segment Routing for Traffic Engineering Policy
interface TenGigE0/0/0/2
circuit-type level-2-only
point-to-point
hello-padding disable
address-family ipv4 unicast
adjacency-sid absolute 15302
/* Configure Segment-list */
PE1:
configure
segment-routing
global-block 180000 200000
traffic-eng
logging
policy status
segment-routing
traffic-eng
segment-list name pref_sid_to_PE3
index 1 mpls label 180020
!
!
configure
segment-routing
local-block 15000 15999
traffic-eng
logging
policy status
segment-routing
traffic-eng
segment-list name pref_adj_sid_to_PE3
index 1 mpls label 15101
index 2 mpls label 15202
!
!
/* Configure SR-TE policy */
segment-routing
traffic-eng
policy pref_sid_to_PE3
color 9001 end-point ipv4 20.20.20.20
candidate-paths
preference 10
explicit segment-list pref_sid_to_PE3
!
!
segment-routing
traffic-eng
policy pref_adj_sid_to_PE3
color 9001 end-point ipv4 20.20.20.20
candidate-paths
preference 200
explicit segment-list pref_adj_sid_to_PE3
!
!
/* You can configure multiple preferences for an SR policy. Among the configured preferences,
the largest number takes the highest precedence */
segment-routing
traffic-eng
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Running Configuration
631