Cisco ASR 9000 Series Configuration Manuallines page 689

L2VPN Services over Segment Routing for Traffic Engineering Policy
interface GigE0/0/0/2.2 l2transport
encapsulation dot1q 1
!
l2vpn
xconnect group evpn_vpws
p2p e1_10
interface GigE0/0/0/2.2
neighbor evpn evi 2 target 10 source 10
!
!
PE2:
configure
interface GigE0/0/0/2.4 l2transport
encapsulation dot1q 1
!
l2vpn
xconnect group evpn_vpws
p2p e3_30
interface GigE0/0/0/2.4
neighbor evpn evi 2 target 10 source 10
!
!
!
/* Configure VPWS with Pseudowire Headend */
generic-interface-list ifl
interface HundredGigE0/0/0/0
!
interface PW-Ether18
attach generic-interface-list ifl
!
interface PW-Ether18.4
ipv4 address 123.123.123.1 255.255.255.0
encapsulation dot1q 4
!
l2vpn
xconnect group evpn_vpws
p2p e3_30
interface PW-Ether18
neighbor evpn evi 4 target 30 source 30
!
interface GigE0/0/0/2.4 l2transport
encapsulation dot1q 4
!
l2vpn
xconnect group evpn_vpws
p2p e3_30
interface GigE0/0/0/2.4
neighbor evpn evi 4 target 30 source 30
!
Verify EVPN VPWS On Demand Next Hop with SR-TE Configuration
Verify if SR-TE policy is auto-provisioned for each L2 service configured on EVPN ODN.
PE1# show segment-routing traffic-eng policy
SR-TE policy database
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Verify EVPN VPWS On Demand Next Hop with SR-TE Configuration
663