Cisco ASR 9000 Series Configuration Manuallines page 566

Configure a Bridge Domain
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the global configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters the l2vpn configuration mode.
Step 3
bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 6005
Enters the bridge group configuration mode.
Step 4 bridge-domain bridge-domain-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain 6005
Enters the bridge domain configuration mode.
Step 5
interface Bundle-Ether bundle-id
Example:
RP/0/RSP0/CPU0:router(config-evpn)# interface Bundle-Ether2.1
Enters bundle interface configuration mode.
Step 6 evi ethernet vpn id
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# evi 6005
Creates the ethernet VPN ID.
Step 7
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
540
EVPN Features