Configuring L2Tpv3 Over Ipv4 Tunnels: Example; Configuring A Dynamic L2Tpv3 Pseudowire - Cisco ASR 9000 Series Configuration Manuallines

Implementing Point to Point Layer 2 Services
l2vpn
xconnect group span
p2p span-foo
monitor-session customer-foo
neighbor ipv6 1111:3333::cdef pw-id 1001
pw-class ts
source 1111:3333::abcd
l2tp static local cookie size 8 value 0xabcd 0x1234
l2tp static remote cookie size 8 value 0xcdef 0x5678
For more information on:
• L2TPv3 over IPv6 tunnel concepts, see
• Configuration procedures, see

Configuring L2TPv3 over IPv4 Tunnels: Example

This section provides examples for:

Configuring a Dynamic L2TPv3 Pseudowire

Perform this task to configure a dynamic L2TPv3 pseudowire connecting to a remote IPv4 peer.
SUMMARY STEPS
1. configure
2. l2vpn
3. xconnect group name
4. p2p name
5. interface type interface-path-id
6. neighbor ipv4 ip-address pw-id number
7. pw-class pw-class-name
8. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enter L2VPN configure submode.
Step 3
xconnect group name
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
L2TPv3 over IPv6
Configuring L2TPv3 over IPv6 Tunnels
Configuring L2TPv3 over IPv4 Tunnels: Example
197