Cisco ASR 9000 Series Configuration Manuallines page 313

Implementing Multipoint Layer 2 Services
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. pw-class class-name
13. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3 pw-class { name }
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class path1
Configures the pseudowire class template name to use for the pseudowire.
Step 4
encapsulation mpls
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
Configures the pseudowire encapsulation to MPLS.
Step 5 load-balancing flow-label { both | code | receive | transmit } [ static ]
configure
l2vpn
pw-class { name }
encapsulation mpls
load-balancing flow-label { both | code | receive | transmit } [ static ]
exit
exit
xconnect group group-name
p2p xconnect-name
interface type interface-path-id
neighbor A.B.C.D pw-id pseudowire-id
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Enabling Load Balancing with ECMP and FAT PW for VPWS
287