Addressing; Program Starting Address - Vari Lite VLX3 User Manual

Addressing

Program Starting Address

The address setting for DMX console controlled systems is entered using the Menu Display (refer to
"Menu Operation" on page
Note: Refer to your console operating instructions for specific information regarding its addressing
requirements.
Program a DMX starting address:
Step 1. Press [ESC] to access the main menu of the luminaire.
Step 2. Press [Up] / [Down] arrows until Address appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows to enter starting address.
Step 4. Press [Enter] to set.
02.97 03.000 1 A
58). The luminaire retains the DMX address even when power is removed.
1 7 Dec emb er 2 012
I : A
NSTALLATION DDRESSING
2
19