Vari Lite VLX3 User Manual page 89

Message Description
n/a Colors (light output) not
matching from luminaire
to luminaire
02.97 03.000 1 A
Table A-2: Troubleshooting Chart (Continued)
Symptom
Color output not match-
ing other VLX3 Wash
fixtures operating at
same control settings.
1 7 Dec emb er 2 012
T
ROUBLESHOOTING AND
Possible Cause/Remedy
Calibration turned On or Off...
- Check fixture calibration setting. Make sure
calibration is set to same setting (On or Off) as
other fixtures.
- Check dimming curve setting. Make sure
dimming curve selection (Linear or Curve) is
same for all fixtures.
A
M
AINTENANCE
73