Mac Os Pc/Laptop - Kindermann Klick & Show Installation And User Manual

Mouse:
Native:
Lowest Latency (Mouse):
4. Click the Sensor-button or the symbol at desktop of PC to start mirroring the desktop on the main
screen, LED is static red. An OSD message shows: logged in user name and whether REMOTE-desktop
control ("Remote Control" and "Remote View") is locked or unlocked.
5. Click the Sensor-button again, to stop mirroring, LED shows green
6. Disconnect the Sensor-button at end of meeting.

6.1.2 Mac OS PC/Laptop

At least operation system macOS 10.9 is required.
When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter-
program "WirelessMedia" first on your Laptop / PC. Run this Starter-program.
When the Starter-program is pre-installed one time, Klick & Show is ready to use, with plug-in of Sensor-
button. Continue with Step 2.
1. When Starter-program „ WirelessMedia-macOS.app " is not yet been installed on PC, please proceed,
as is explained in chapter 6.4, 6.5.
2. Plug a Sensor-button TOUCH to the USB port of your MAC. The Klick & Show application is starting
automatically and a symbol is displayed in the task bar of the PC/laptop
3. Until the Sensor-button shows a static green LED indicator, or until you see a message table showing up
at the right bottom corner of desktop "Ready to share", Klick & Show is ready.
A Klick & Show status icon is added to the MAC status bar at the right bottom corner
The setting is applied individually for this laptop only.
The shape of mouse-pointer is equal the shape in application. There
may be a small delay in movement of the cursor (approx. 150 ms).
The movement of mouse-pointer is displayed very smooth with hardly
noticeable delay (about 20 ms) on the main screen, which significantly
improves the operation of the application from the main screen. The
look of the mouse pointer is every time, in all applications, like a typical
cursor arrow.
.
.
47