Installation Klick & Show; Installation Methods For The Base-Unit - Kindermann Klick & Show Installation And User Manual

3. Installation Klick & Show
Overview

Installation methods for the Base-unit


Table mounting

Wall mounting

Antenna placement and orientation

Wiring Diagram

Power Connection

Video Connection

Audio Connection

LAN Connection

USB Connection

3.1 Installation methods for the Base-unit
The Base-unit can be placed on a table in meeting room or be mounted on the wall.
The antennas are removable. They can rotate or tilt for better wireless connection.
Note:
For optimum function, install the Base-unit near monitor. Avoid obstacles between Sensor-button TOUCH and
Base-unit.
Necessary tools
• A drill (type of drill depends on the type of wall/table)
• Flat screwdriver
• Additional screwdriver that matches the mounting screws (mounting screws not included in the package).
Necessary parts
• 2 mounting screws (the head of the screw has to be smaller than the whole of the bracket)
• 2 plugs fitting to Wall and Screws
• 2 mounting bracket (included in the box).
How to install
1. Drill two holes in the wall as indicated on the drawing. Horizontal distance: 177 mm ± 0.15.
2. At the bottom of Base-unit, place the bracket on the 4 holes and turn in 4 delivered flat screws to be fasten
enough.
18