2.
"Pairing" to the Base-unit is done automatically afterwards.
When you get the message:
you can plug out the Sensor-button TOUCH. Update all other Sensor-buttons accordingly.
7.4
Software update of USB-stick of Sensor-button TOUCH
After updating of Base-unit and Sensor-buttons the USB-stick of the Sensor-button TOUCH should be written
with the actual STARTER-program for Windows, MAC and APPs for mobile-units.
1. Plug the USB-stick of Sensor-button TOUCH to an USB port of Base-unit.
2. Enter Menu "Settings" of Klick&Show, and click on symbol
3. The Starter-program is written tot he USB-stick, an OSD-windows shows the progress.
When ready, unplug the USB-stick.
:
64