Mirroring Of The Desktop; Pc / Laptop - Kindermann Klick & Show Installation And User Manual

Wireless presentation solution

Hide thumbs Also See for Klick & Show:

Table of Contents

4.3

Mirroring of the desktop

4.3.1

When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter-

program "WirelessMedia" first on your Laptop / PC. Run this Starter-program.

When the Starter-program is pre-installed one time, Klick & Show is ready to use, continue with step 5.

There are 4 possibilities for loading and executing the App "WirelessMedia-windows.exe" for Windows or

„WirelessMedia-macOS.app" for Apple:

1. The best and safest way: download the APP via LAN or WiFI of Base-unit, enter IP-address (3) of

status-bar of Home screen in a browser, download APP, continue with 5.

2. Download APP from Internet

3. Store APP on a USB-stick at Base-unit: plug a USB-stick to USB port of Base-unit and copy Start-

program „WirelessMedia.exe" to USB-stick by clicking on symbol

4. Copy the APP from integrated USB-stick of Sensor-button TOUCH on PC.

5. Plug a Sensor-button TOUCH to the USB port of your PC or Laptop. The Klick & Show application is

starting automatically and a symbol is displayed in the task bar of the PC/laptop

(You may need to click the up arrow

6. Till the transmitter button shows a static green LED indicator, or till you see a message table showing up

at the right bottom corner of desktop "Ready to share",

7. Click the Sensor-button or with mouse the symbol at screen, to start mirroring the desktop on the main

screen, LED is static red. An OSD message shows: logged in user name and status of "Remote Control"

and "Remote View" of desktop (locked/unlocked).

8. Click the Sensor-button again, to stop mirroring, LED shows green

9. Disconnect the Sensor-button at end of meeting.

www.klickandshow.com

in the task bar, to view the icon.)

, continue with 5.

Table of Contents