Sensor-Button Touch - Kindermann Klick & Show Installation And User Manual

2.1.3

Sensor-Button TOUCH

The Klick & Show Sensor-button TOUCH is a dongle, which is used for extending or mirroring the desktop from a
personal PC or MAC desktop to the Base-unit and the main screen in a meeting. The button can be connected to
the Base-unit to update the software or for pairing.
ID
1
2
3
4
Status LED
LED indicator is static green:

LED indicator is static red:

LED indicator is flashing green:

LED indicator is flashing white:

LED indicator is Off:

Name
- To connect to an USP-port of a PC/Laptop ( for sharing
your screen) or
USB connector
- pairing the Button to the Base-unit or
- for updating its software)
Sensor-button Touch-function with tactile response,
TOUCH for switching On and Off the presentation of the screen
Status LED Indicates the status of the button
USB-stick with Starter-program„WirelessMedia.***" for copying of
USB-Stick
to PC or MAC; printable PDF of User manual.
ready to transmit a picture, waiting on USER for touch.
1. Transmits a picture,
2. Pairing is done (at the Base-unit). You can now unplug the Button
from the Base-unit.
1. The button is plugged in the laptop and initializing,
2. Pairing/software upgrading of the button in the Base-unit is in
progress.
the button is locked ((„Do not disturb" – for future expansions)
the button is not plugged in the PC/Laptop, defective or
USB port or computer might be defective.
Description
13